news
How to really distinguish the quality of cables and wires
[Summary ] It may be more difficult to detect whether the cable is full or not by using the weight measurement method. Or it is a good way to have the rice label printed in the factory, but it should be noted that there is no way to print the rice label for lines with a diameter less than 5mm.

It may be more difficult to detect whether the cable is full by using the weight measurement method, because customers generally do not have the equipment to actually measure the number of meters. Or it is a good way to have the rice label printed in the factory, but it should be noted that there is no way to print the rice label for lines with a diameter less than 5mm.
Foot square copper is a precious metal. If you lose a little on the diameter of copper, you can reduce a lot of raw material costs. In this case, you need to use a micrometer to measure the diameter of copper wire. If you don't have a micrometer, an easier way is to take the whole coil of wire and weigh it to see if it's much lighter than a good quality cable. Or you can refer to the nominal weight given by the factory. The nominal weight given by some factories is on the low side, so naturally the product quality cannot be guaranteed.
How to identify the quality inside the wire and cable:
Extruder
The plastics are made of high-quality virgin plastics, which have good bending performance and will not produce textures when bending the cables. Poor recycled plastics will have obvious textures after several times of bending, and will break after many times of bending.
cable equipment
In order to ensure the roundness of the cable, the filler will be added to the core of the multi-core cable, and the thickness of the sheath will be thicker. If the cable you get is not round, it means that the filler is very little. And the sheath is made thinner.
cable equipment
The multi-strand copper wire will be bundled during production to improve the tensile performance, roundness, electrical properties and tightness of the insulating layer of the copper core, but since the bundled wire will increase the amount of copper used, many The factory omits this step. The way to tell the difference is to cut the core wire of the cable to see if the copper wires inside are regularly twisted together.
Braided cables with copper mesh braid, the braid accounts for a large part of the cost of cable raw materials, and the coverage of the braid directly affects the electrical performance of the cable. At the same time, the tight braid can increase the strength of the cable and reduce the number of wires and cables. The electrical performance of the cable is degraded in the bent state. Therefore, it is an important means to distinguish between good and bad cables to see whether the braided layer has high coverage and uniform and fine braiding.
0users like this.